artexmg - My printer (a Delta) has 280 mm diameter and a height of 320 mm. It may accommodate your model.

bmmal - That is a large print volume. If the part could be split and keyed back together I can probably help you. The build volume on my Stratasys is 8x8x12. It also has a heated build chamber so it can print ABS without any of the issues you see with parts warping or splitting otherwise. Depending on which material you want to use and the geometry, such a large part may warp or crack due to material shrink if not printed in a heated chamber.

vinnie90 - If you dont mind doing it in parts I can do it. I have 3 machines, so I can do it pretty quick. My last project was 4 foot long.

rapidtechnician - If you need the part in 1 piece please contact me direct. I have multiple machines with platforms up to about 25 inches square.... Material will be ABS like and will not have any warping issues that the other smaller DIY printers have plus my parts are accurate +-.002 to .005 inch per inch and the layer thickness is 16 micron layers...