Mount a standard microphone stand pop filter onto your Blue Yeti desktop microphone. The pop filters are made to be screwed onto a normal microphones stand with a metal bracket. This replaces that bracket and allows you to mound it on your Yeti microphone. Fits onto the existing bracket and screws in place. You can adjust the angle by loosening the bolt.Unscrew one of the bolts on the microphone, take the two washers that should be on this bolt, place one before and one after the 3D printed bracket and screw back on. Then unscrew your pop filter from the metal mounting bracket (pictured) you don't need, and screw it back into the new bracket.