This is a camera holder for the D-Link DSC Series of IP cameras with a bracket that fits on a Makergear-M2. It may be placed in 2 positions (Vertical or horizontal) and slides in and out to "zoom". It replaces the standard bracket and screws into the back of the camera, which provides for swivel. The separate base of the bracket could also be adapted for other mountings. There is a screw hole to position and tighten the slide-out bracket. Also shared on Fusion 360, here: https://fusion360.autodesk.com/projects/yet-another-3d-printer-camera-bracket-for-makergear-and-d-link-dcsPrint both parts "vertical", no support is required - that is print with the threads and hollow tube "up". To get the threads right I made a "process" for the threaded portion and printed with a 1.5mm layer height. The remainder can be printed with any layer height. Any material will do just fine. There is a hole for a screw to hold the bracket - this can be self taped or threaded with a tap.