PCB heatbed for ToyREP 3D Printer and other small machines. This thing is published with courtesy of my friend Dan Kolar who designed this PCB heatbed and made the prototype board. It is just published under my account. Please refer to him as the author. Working area is 100x100mm Mounting holes are 105x105mm apart. Total size of PCB is 120x120mm Copper layer 35um thick CNC milled prototype depicted is probably a bit weaker due to fabrication process and final sanding. Originally it was supposed to be 36-40W. With etching you may get better results. Parameters of the milled prototype are: Resistance of heat bed c. 4.8 OHM Approximately 2.5A at 12V = 30W. Max. achieved temperature 116°C (at room temperature 24.5°C) in 15-20 minutes For heatbed in operation see video https://youtu.be/2MR6av5BDxUPrepare the PCB as per the schematics given in Thing Files. Published files are for Eagle 6+. Or you can use PNG file that is packed in ZIP. Don't use the BW picture from picture gallery! For best results use photo etching. Other parts: 2pcs 0805 SMD LED 1pc 1206 SMD resistor 470R 100K Epcos thermistor c. 350mm of dual wire for power supply and for thermistor 2 pin connector for thermistor As print surface is used 110x110x3mm glass sheet with 10x10mm diagonally cutted across every corner.