This will be 3D printed near you and delivered to your door by May 02
Loading
This thing, once printed and assembled, becomes a GoPro articulated arm aka Parrot Perch clamped to an M8 threaded rod.
https://www.youtube.com/watch?v=491-wPty4Ck&feature=youtu.beThis thing consists of: 3D Printed parts
1.1 Adaptor x1
1.2 Clamp x1
1.3 Corners x2 Off-the-shelf hardware
2.1 M5 Threaded Rod 250mm x1
2.2 M4 x 16 Screw x1
2.3 M4 Nut x1
2.4 M4 Washer x1
2.5 M5 Nut x 13
2.6 M5 Washer x13 Tools
3.1 Small Second Cut Metal File x1
3.2 7mm Wrench x1
3.3 8mm Wrench x2
3.4 Screw Driver to match item 2.2 x1
3.5 4mm Drill Bit x1
3.6 5mm Drill Bit x1
3.7 Chuck for items 3.4 and 3.5 Finishing
4.1 Drill manually M4 hole located on wider edge of clamp.
4.2 Drill manually M5 holes i.e. all remaining holes.
4.3 Deburr all parts including gaps in Adaptor.
4.4 Cut M5 threaded rod into:
4.4.1 170mm length x1
4.4.2 70mm length x1
4.4.3 40mm length x1 Happy Making!
