Acrylic Electronics Mount PlateThe Acrylic Mount Plate, for Prusa or Mendel design Reprap 3D printers, is capable of mounting RAMPS and/or Sanguinololu electronics. The mount plate is made of 5.5mm thick clear acrylic that allows for better viewing than wooden mounting plates. Also, you have no worries of slicing your arm open on a sharp acrylic corner as the plate has rounded edges.Specifications -Capable of mounting RAMPS and/or Sanguinololu electronics -5.5mm thick clear acrylic -Size: 28cm x 9cm x 5.5cm -Rounded cornersParts -Acrylic electronics mount plate -4x Printed mount bracket (elc_mount_bracket.stl)Other Vitamins -4x 6.35mm stand-off spacer -8x M3 35mm screws, nuts, and washers to mount the plate -4x M3 screws to mount the electronics (length depends on your electronics)Licensing -Parts and files: GPLv3 -Images: CC BY SAAcquire mount plate or cut with laser cutter or router.Mount the mount plate to either the front or rear frame threaded rods using the mount brackets and 25mm M3 screws and nuts.