7 days, 3 times per day Rotary pill dispenser. 2x 608z bearings used in this build Print 1 base, 1 lid and 3 feet, then scale a foot by 2x in all axis and print that to use as a handle. This build needs 2x 608Z bearings, so that the lid and base rotate freely, it is a slight push fit with both the shaft into the bearing and the bearings into the base, but once all together is nice and smooth running and won't open if dropped or knocked, i left a blank so that the aperture can be placed over this and again if knocked or dropped the pills wont spill out. I then used a little Acetone-ABS mix as glue to stick the feet and handle onto the base and lid. I printed mine on a Up!Plus at 0.25mm layers and Normal speed using CD-Writer Red and Blue ABS, this unfortunately resulted in the text not being printed very well at all, please feel free to improve on this design. Ive included my STL and Sketchup drawings.