I wanted a screw fit into a 1/8 BSP push fit for my bowden cable, and this solves it nicey.Basically the updated wade for emaker, but the bottom is extended and features a hole for 1/8 bsp screw 4mm push fit pneumatic conector. A slot for a 1/8 nut (5.5mm thickness) is made so that the push fit screws into this. Print. Aquire a 1/8 BSP pneumatic push fit connector to fit 4mm OD tube (99p off ebay) Aquire a 1/8 Nut (5.5mm width) (£2ish for 10 off ebay) - contact me as i have spares if need be) Slide nut into groove Screw 1/8 BSP pneumatic fitting into nut Fit bowden tube Print and marvel at the awsomeness