Development of Moineau pump: http://www.thingiverse.com/thing:7958This is still under development, but the final goal is to develop this into a paste dispenser operated by a stepper motor and used in a 3D printer to form things from any paste-like material. For now, this operates with just a hand crank. Compared to the original, the rotation is reversed and the idea is to feed it from the top and have it push the pumped material out from the nozzle at the bottom.Printed and tested (by hand) a very rough, smaller prototype. Some pumping action was seen with water-flour mixture, so it works on a basic level.Printed and tested a spider coupling for driving the pump. Seems promising, the orbit of the rotor didn't seem to be any kind of a problem. Print and try at your own risk. NOTE! The currently attached SCAD file only forms the hand-cranked version.Bolt the nozzle to the bottom of the chassis. Insert rotor-crank assembly and turn clockwise.Motor mount and couplings will be published when get them finished.