Toy Soldiers Unite Robot Mascot! Another quickie model made for people to have fun with! When printed this model should stand about five inches tall!This one is a mostly static model; being new to having a printer I have yet to determine how much movable parts can be made with the printers so I didn't want to (yet) try pushing my limits.Being a quickie model there are a few errors on it, but they shouldn't prevent the model from printing correctly. I tried to prevent any undercuts on it; if I missed any please let me know!(I would like to note that due to the ABP on the makerbot I am unable to test the model at this time due to leaning on tall prints; once I get a metal HBP surface in I'll run it myself!)This is a "Build the Robot" KIT: some assembly is required! -- TOOLS: Blade: Small blade to remove the rafts once printing is complete. Glue: Super glue to hold pins and parts together. --- USE RAFTS! Most of the parts have small bases and will need to be built on rafts. --- SLOW SPEED - ESPECIALLY ON SMALL PARTS. Some of the smaller parts (hands, pins) will need the speed reduced in order to maintain a modest amount of detail in them and to be sure they're formed right. Slowing down the speed will also reduce the possibility of taller parts from moving due to the printer heads movement. -- PINS Long pins are for the arms, short pins are for the legs. -- HAVE FUN! Self explanatory. :D =============================== PART UPDATE LIST Updated following parts on 2013_05_16 "TSU_Robot_pin_set_b.stl" "TSU_Robot_LArm_bottom_b.stl" "TSU_Robot_RArm_bottom_b.stl" "TSU_Robot_LArm_Top_b.stl" "TSU_Robot_RArm_Top_b.stl"