Variations of PL1Q Vampire, the 3d printable quadcopterFor the Canopy, it broke in my hands, so I made it a bit thicker and added pilar's in stead of tab's. It is very sturdy now, but the weight is still 34 grams.Then the body. After 2 failures (the bridges of the cross). I made a 2 part thing of it. Even without glue it fits very nice.P.S. The total weight comes down to 213 grams. Sliced with Slic3r 6.0 with 2 solid layers top and bottom and a fill ratio of 0.3Made some modifications to the motormount, added a guard for a 8" prop. and made an alternative canopy in a dome shape.Another update:I printed the dome 16mm higher to contain a receiver-bracket. the receiver is mounted upside down, so i will need only short leads between the multiwii and the receiver. The exploded view will make it more clear.Stl's & photo's will follow later.