The DeskDock holds your Digitizer Illuminator at precisely a 7 degree angle. This 7 degree angle is the optimal lighting angle for the Digitizer Illuminator when it is mounted on the DeskDock and centered beneath the camera's lens. The Digitizer Illuminator is a variable brightness lighting system for your MakerBot Digitizer Desktop 3D Scanner. The Digitizer Illuminator snaps into the DeskDock allowing you to provide light from beneath your Digitizer's camera lens. More to follow from the wonderful world of GHILL Engineering's Digitizer Illumination Project!Simply snap your Digitizer Illuminator into the DeskDock- it will click right in. Print on low resolution, 10% infix, 2 shells. Original printed on a MakerBot Replicator 2x.