I split the original Goblet design to allow the Frame and cup to be printed in different colours / materials. There are various versions of the cup to suit your preferred method of printing / slicer. The frame prints well at 0.2mm Layer height, 2 shells & 15% fill. There are 3 versions of the cup - Spoke Goblet Cup Shelled - 0.8mm Wall.stl Prints well at 0.2mm Layer Height, 1 shell, requires supports. Spoke Goblet Cup redesigned for no supports.stl Prints well at, 0.2mm Layer height, 2 shells, 15% infill. Does not need supports. Spoke Goblet Cup - solid.stl Print with an open bottom, if less the 4 shells you may wish to add supports. There is also some time laps video - http://youtu.be/kTzR-SXV5qM