Is your USS Enterprise print lonely? Could it use a little buddy? This is a kitbash of sitts314's excellent Enterprise to create the one nacelle ships of Franz Joseph's old school Star Fleet Technical Manual from the late 70's.I've been focusing all my prints on relatively small scale, and as a result, assembly will require some sanding/filing to get all the pieces to fit together properly. The smaller the model, the more work to assemble. Also try to make your slicer of choice output as thin of bottom as possible. I kept the scale of sitts314's source. If you're interested at other scales, this is the sizing for three common modeling scales: 1:3125 = 0.294 (this is the scale of the Starline 2500 gaming miniatures) 1:2500 = 0.363 (a small common trek modeling scale) 1:1600 = 0.574 (another common modeling scale) I wouldn't recommend trying anything lower than 1:3125. The deflector dish may be more trouble than it's worth at any scale.
- 0 inches x 0 inches x 0 inches
- this product is 3D printed
- 16 available colors
- material is a strong plastic
- free delivery by May 01
- 0 parts