A 3D printable coffee press designed to help you to get the most out of the flavor in your coffee. A wire mesh is recommended to be placed on the bottom side of the plunger.Print the mug with the bottom (side that the mug would rest on usually while in use) on the build plate. Print the plunger with the bottom end (the end that still has holes and is larger in radius than the handle) on the build plate. Print the lid with a flat surface on the build plate. Use the Lid.stl, Press Mug.stl and Lid.stl to print the object. Print in the highest resolution possible (.1 or .01 of mm or thinner is perfect) If any adjustments are necessary use a sander. Acetone evaporation therapy will smooth the print but isn't necessarily safe to use. Ingestion from the mug isn't recommended after acetone use.