If you need lots of Arduino Compatible controllers, but don’t need the price tag of a full development platform? This handy little kit is perfect for anyone who is experienced with the Arduino Compatible Microcontrollers, and needs to include a lot more of them in his/her next project. If you follow the steps on this page making a project on a breadboard is a snap, tie as many ATMEGA328′s together as you need to. The sky is the limit, and everything you need can be found at https://www.virtuabotix.com/feed/?p=407!Pickup the kit at http://www.amazon.com/gp/product/B007AX97ZEOr build it yourself with our parts list and schematics.What you need: • Bareduino 328 kit -> http://www.amazon.com/gp/product/B007AX97ZE • Breadboard • Jumper wires • Grounding strap (chip is ESD sensitive) • Time to dedicate to your Mad Scientist laugh (and build the circuit too).Detailed instructions with pictures can be found at https://www.virtuabotix.com/feed/?p=407Whats inside the kit, besides awesomeness?: • 1 x P-DIP ATMEGA328P-PU programmed with Duemilanove Bootloader • 3 x Through-Hole 22pF Capacitors (2 for crystal and 1 for Analog power smoothing) • 1 x Through-Hole HC-49S 16 MHz Crystal (for clock) • 1 x Through-Hole 1/4 Watt 22 K ohm resistor (for reset pullup) • Printed instructionsBest of luck, and I hope you enjoy!