A Namekian who is a reincarnation of the evil King Piccolo (ピッコロ, Pikkoro), who later befriends Gohan, Goku's Son.I created this model in LightWave about 11 years ago, and used it to demonstrate the application of Non-photo Realistic Rendering outlines in Java3D: http://web.archive.org/web/20011223110454/http://www.j3d.org/tutorials/quick_fix/npr_line.htmlPrint picolo.stl and stand.stl. I printed this at 0.15mm layer height and 0.4mm extrusion width. If you plan to print at a thicker layer height, I'd recommend scaling it up.The model is tilted to make it easier to print with out supports, which is why the stand is printed separately and I added a hole to be able to put it on the stand.I had trouble printing the stand as a cylinder (I was getting a lot of twisting and wobbling) so I made it into a rectangle instead, which also ended up twisting and wobbling but it fit. If you want to create your own the hole is about 5mm.== Update 2012.April.11 ==I've added version 2 models (piccolo.v2.stl and stand.v2.stl).These have 3 important changes. 1) I attached the eyes to the head so that it is solid. 2) I removed the inside of the mouth. 3) I made the stand cylinder thicker, that should avoid the warping and wobbling.I have not printed these new models yet, so I don't know if there are any new or different issues, but I did Skein it and it looked better.