Here is my Draciel design i remade based on the hasbro Beyblade Draciel F and Draciel S. This attack ring is intended to fit on the original first generation beyblade. Like most of my beyblade designs i have made parts of the attack ring larger or thicker for more durability. I will upload the STL file soon for download Printed on my 5th Gen Replicator 2 shells, 5% infill, 0.20mm I will do another high print of it soon with more infill and i might try 0.05mm Let me know if you have any questions Upload New STL file Draciel.thing Print the file Clean and Let it rip! :) ( NOTE: i have had some issues opening the old file in Makerbot Desktop. If you find that only one small component of the attach ring only shows up, then try open it in another program to display it correctly. I had to use Autodesk3D print utility to open the file and then save it again and upload the save in Makerware. But i have updated the file and it should work with Desktop) I made this design using the 123D design app on my mac air pro. I used my beyblade template i have uploaded and modelled my own draciel head for my bebyblades unique look. Once you sketch the first draciel head (or whatever other bit beast you prefer) you can extrude each component to preference. Once you have finished the design you can group all pieces and copy and paste to use it as many times as you like and space it around the radius. I had a bit of problems trying to use the circle pattern feature on this design to replicate the draciel head so instead i copied and paste each head to replicate. This took approximately 2-3 hours and this was the first time i used the project feature to put more detail in places i didn't think was possible. I also used colours for the first time and stuck with only two colours for dual nozzle purposes. Enjoy guys and message me if you have any problems or questions :)