Another in a line of boring and mundane household items.My apartment has vertical blinds on all the windows and they are all in some need of repair.This design is for a set of parts for a vertical blind:1 Bottom Weight (in 2 parts because it was too big to print otherwise 1 Hanger (shortened for printing but should work fine) 2 * Cord clips (The bit that attaches the strings to the weight)As with a lot of my designs so far it has small pieces so I don\'t know how well it will print but I hope the design can modified to work if needs be.The big reason I made this design was not cost. I've found 3 different makers of these parts and none of the are a perfect for for my blinds. So what I need is the capacity to make one or two small items to my exact requirements.I\'ve included the SKP file in case anyone wants it.This design is untested1 STL file with 6 parts NOTES: The bottom weight is printed upside downThe join piece for the bottom weight is not perfect but should hold it in place when its in the sleeve.The cord clips include a groove for putting in the string and affix with a drop of glue.