Why would you just tell the time, when you could tell the time from a watch on a 3D printed watch band!This is a 3D printable one-piece watch band that is strong, functional and light. It fits watches that have a 22mm lug width, and a lug to lug distance of 46.2mm (I designed it to fit a Seiko SNDA65 watch). If enough people are interested, I can design a few more sizes, and size the lug to lug distance for various watches! I posted the design process for this watch band on my blog: http://colin-ho.com/3d-printed-watch-band/Makerbot printing settings: I printed it on a Makerbot replicator with the default slicing settings, with a raft, object infill of 100% and 2 shells. Post print assembly:After printing is done, take a small file and carefully smooth out the male and female sides of the watch band clasp until they slide and mate snugly (tight enough to no fall out, loose enough to easily take off)Take a thin metal rod (like a small allen key) and insert it through the spring-bar holes to make sure that the spring bars have no obstructions. Attach the watch one spring bar at a time!