This mermaid ain't no princess! She is more fish than human!Modeled in Sculptris and used Truespace 5 to cut the bottom flat.I used 3 shells and 0% infillthere are a few top of model holes at those settings (near eyes and top of the fins) I filled them in with abs/acetone 'goop' (a mix of abs and acetone, I make it as thick as white glue (elmers))I prefer not using the infill and 3 shells because I don't get separation cracks and the models are very solid (with the exception of the holes on top i sometimes get.) they also print faster.