A Minecraft (tm) torch with wall mount and decals, for flashlights or other, custom light sources. You expect your children to help in the household? Print this - problem solved. Promised ;-) Short assembly/parts video: http://www.youtube.com/watch?v=WBvu3jul6pA Do NOT print the included STL files. These are only examples to clarify the "printing number" in the OpenSCAD source file. This file also contains a lot of explanations and (hopefully) other helpful notes. You'll need a flashlight with a rear button. Preferably, the top lens can be detached. By default, the torch has the dimensions (40 x 40 x 200)mm. Any flashlight up to a length of ~140mm and a diameter < ~34mm can be used. If it does not fit, the torch's size needs to be increased. Keep in mind that this also requires scaling the the print-sheet, with the Minecraft torch decals on it. The flashlight edition of the Minecraft Torch consists of: NOTES FOR PRINTING: The wall mount has a slot and a hole at the bottom so that a Minecraft torch can be put in or taken out while a cable is attached to it. ... UPDATE 9/2014: I included the missing screw library, which can also be found here: http://www.thingiverse.com/thing:8793