This housing holds a Tiva C Series TM4C123G LaunchPad microcontroller, which is used in the edX Embedded Systems course from UTAustinX, found here: https://www.edx.org/course/utaustinx/utaustinx-ut-6-01x-embedded-systems-1172 The board is fragile and awkward to handle, so I developed this housing to be part of a plate to which this and a breadboard will be secured. There is an access port along the right side, under the reset switch, intended for routing wires under the housing into the headers under the board. The holes on the top and bottom ends are for a cover I eventually intend to add to the design. Included with the files for the thing are the beginnings of a model of the board itself and a primitive model of a micro USB cable for reference.