We wanted to try how the upcoming Lumia 920 feels in hands. So we quickly created a 3D model from the phone, printed it out and added picture of start screen.The phone feels awesome and we are waiting to get real one in hands!If you are also waiting for new Lumia 920, print it out with our miniFactory 3D printer and try how it feels. Sadly, the electronics are not included in print :)The print needs quite much space on Z axis, since the model height is 130.3mm. Other dimensions are much lower. The Lumia 920 is only 70.8mm wide and 10.7mm thick.We added a "lifted" display so it can be seen in real printed part. It has 3 buttons on the side and about 1mm deep cutout for camera and flash in back of the model.We printed it out with following settings: Layer height: 0.1mm Nozzle diameter: 0.35mm Perimeters: 2 Solid infills: 4 Infill: 0%The print took 4h 2mins with speed settings quite slow and filament used was only about 5 meters (1.75mm).Enjoy the model and print it out! :)