This is a replacement adjustable foot for living room furniture. The feet go to a coffee table and end tables. During one of our many home moves we lost one of the adjustable feet. I went ahead and copied the foot and printed it out.I created the part in AutoDesk Inventor, so I posted the .ipt and .stl files. Note that I created the threads in Inventor using the “Thread Modeler” add in. It was my first time using the plug in and it worked great. You can get it at http://labs.autodesk.com/utilities/thread_modeler/Files:1.) Print (or Modify and then Print). For the UP!, I had the quality set to fine and the fill set to solid. 2.) Clean up and Install 3.) Show spouse you finally fixed it :) (only took a few years)My prints were made on an Afinia UP! PP3DP printer. I printed out one with and without threads because it was my first time trying to print threads. I was able to use the one with threads.