Connects a Gardena Microdrip 6mm hose to a 1/2" water outlet. This is part of a home brewed balcony watering system where inexpensive solenoid valves are to be used to control segments of the Gardena Microdrip watering system. Printed on Mendel I3 Berlin, sliced using KISS Slicer with 0.4mm extrusion width, 0.2mm skin thickness, rough support and 10% straight infill. Needs some afterwork as cleaning the 3mm end nozzle with a 3mm drill and scraping off the support. The 1/2" internal thread should work "out of the box".