Hi Folks, Check out the BlueDot Quadcopter Frame. The frame is laser cut from heat treated aluminum alloy 6061-T6 that is anodized with a satin blue finish. Here are the basics: Dimensions: 200mm by 170mm Weight: 170g to 200g Material: Anodized Aluminum 6061-T6 (2.5mm and 1.5mm thick) Flight Controller Mount: 30mm to 45mm Motor Mount: 11m to 19mm Camera Mount: 32mm Born and Raised in the USA The frame can accommodate a range of standard parts. Here is a list of suggested equipment: Flight Controller: KK, Flip MWC, Acro Naze32, MultiWii or Open Pilot CC3D Motors: Tiger N1806-2300KV, RCX 1804-2400KV or Sunny Sky 2204-2300KV Propellers: 5x3x2 or 5x4.5x2 Camera: FatShark PilotCAM or Sony 600TVL Super HAD CCD Video Transmitter: Immersion RC 5.8Ghz 600mW Audio/Video Transmitter Speed Controller: HK 12A BlueSeries or RTFQ 4-in-1 12A ESC Battery: Turnigy Nano-Tech 1300mAh 3S Lipo The BlueDot frame can be purchased for $30 here: http://www.bluedotquad.com/ I'm a nerd...so, I named the frame after the Pale Blue Dot photograph. The iconic photograph of the planet Earth was taken by the Voyager-1 spacecraft at the edge of the solar system from a record distance of 6 billion kilometers. Earth is clearly visible in the photograph as a fractional blue pixel against the vastness of space. NASA took the image at the request of Carl Sagan (American astronomer, astrophysicist, cosmologist...the man).