The town of Winterfell, as seen in the title sequence of the TV series "Game of Thrones" --- featured on wired.com: http://www.wired.com/design/2013/02/3d-printed-mini-winterfell/ --- This model was built from scratch, based on screen captures from the Game of Thrones title sequence. There, a short fly-over of Winterfell is shown, whilst the town builds up from the ground . The model does not include Godswood which would be right next to Winterfell See also http://gameofthrones.wikia.com/wiki/Title_sequence http://gameofthrones.wikia.com/wiki/Winterfell I have replaced the original STL file with two new ones. The Winterfell.STL is all the buildings, but does not include any door/window openings. The Winterfell_detailed.STL file though adds Windows and Doors to many of the buildings. This model was designed in Solidworks from the ground up, based on one screen capture (see attached). It printed successfully on a Replicator 2 using 0.2mm layers, 10% infill, 2 shells, with a size of about 80x80mm.