Loading
Needed a small sprinkler to work with the tubing I was using in my setup. I have also used one of these as a "filter" on the inlet to my small sub pump. Added the 3dponics sprinkler to the sources as this idea was loosely inspired by that tube style sprinkler.No Supports. Tube connection facing up. Solid infill printed in ABS filament. Printed at 0.2mm and 0.25 mm with no problems. Will likely work fine with other settings but that is what I have tested.
Sprinkler or inlet filter for 1/2" ID Tube.
Order summary
Sprinkler or inlet filter for 1/2" ID Tube.
Color:
Quantity:
Subtotal
$
Delivery (May 04 - May 06)
Free
Total
$