-!!!READ BEFORE INSTALL!!! -must use M3 30mm bolts for mounting through the aluminium extruder to the stepper motor! -25mm bolts will not be sufficient for this install. For those of you who have a hexagon hot end, we've all faced the problematic issue of finding the right mounting system for our hot end. I pulled the main design from Jon Lawrence's 1405 front, and threw in my solution. I hope you all never threw away your old x-motor mount! The old motor mount is whats going to give you the rigidity needed to handle the weight and purpose of the mount. Special thanks to stoutwind_de for the fan mount on this hotend.