This is a case to protect the wonderful little LC100 sub $40 inductance and capacitance meter. Upper and lower case halves snap together. Solidworks source files and Ultimaker profile settings are included. Modify however you would like.Made with a 0.4 mm diameter nozzle and black 4043D PLA. Layer height 0.09 mm, wall thickness 0.85 mm and 20% fill. Temperature 227 C, cooling fan off and be sure to check your machine is not under extruding. The catches need to be fused together well so they don't snap off. The upper case needs to be supported. The line support setting worked well in Cura 14.09, really easy to remove. If you want to edit the solidworks design: Top is the top assembly that was used to create Case. Case got split into upper case and lower case. The detail features are added within upper case and lower case.