It is an easy to clean drying rack for NeilMed Sinus Rinse. Let it dry during the day and if you have company over you can always hide it under the sink. I made this because I only have one bathroom. So having the sinus rinse rack tapped to the mirror out in the open when guest come is not really appealing... So I made one that is movable and also has a drip tray to avoid water everywhere. I added the SolidWorks files I used to create this. Including the Sinus Rinse bottle and nozzle. Just on the off chance someone with SolidWorks wants to modify it with text or something.I would recommend printing with as thick of a shell as you can, to make sure it is watertight. Also use at least 10% fill so it does not collapse. I used 0.3mm step height in the shown picture, but 0.4mm would work fine as well. It may look like it is going to fall during printing but I never needed to add supports (printed 3 times). You may need to file the feet to get it perfectly level.