Part of a little research project in tools based on snap-off blades and 3d-printing. https://github.com/jonnor/projects/tree/master/snapblade-tools Works OK for medium- and thick paper, as well as cardboard. Thin paper and other soft/flexible material does not work well when attempting to use shearing motion, but the blades are so sharp that they are easily cut just by slicing though. Also succesfully tested cutting small electronics wires, small plastic pieces, including 2.85 mm PLA filament. Vitamins needed: Print 2 pieces of the simple-scissors STL (approx 15-20 mins per piece). Snap off 3 pieces of each blade before sliding into slot in printed part. Possible improvements: