DJI F550 Landing Gear was made from 2mm plywood at first. Then recreated it in 3D. Unfortunately my 3D printer is not capable of printing this yet but i will be enlarging it soon. Any advise and editing welcome. Please upload photos if you were able to print this. My plywood version was super light and very strong. This landing gear i feel is very nice because it has a space for a 4 cell battery to be mounted and protected underneath the chopper giving it a lower center of gravity. I have made this for a couple of my friends and only one has been destroyed with a very bad failure of my naza fly away problem. Lost a gopro but i think the landing gear took most of the force saving the rest of the quad copter. Went back to the laser machine re cut the landing gear and 1 hour later i was up and running again. Also build this custom box for my F550. Easy to transport with caster wheels attached underneath. I will see if i can find the DXF files and upload that as well. In cura please scale to 100. Sorry i dont know how to fix this problem. I am not good at 3d creating software. Just make sure the dimensions are as following W;281.7 , D;296.1 , H;166.6 Picture attachedJust make sure the dimensions are as following Cura Settings W;281.7 , D;296.1 , H;166.6 Picture attached