Cooling fan mount for bottom cooling of the TinyG CNC Controller V8. Used the fan as the mounting medium using standard computer fan screws. Added tabs to mount the whole assembly on your workstation or inside an enclosure. Has enough room to pull in air underneath and exit on the bottom of the TinyG Controller as that is stated as the best place to cool it. I am waiting on my TinyG to come in with my Shapeoko 2 kit. When it does I will show it mounted. Pulled the screw hole locations and diameters from the TinyG website: https://github.com/synthetos/TinyG/wiki/TinyG-Hardware-Information Revision: Updated the second part to add space on top of the mount for clearance of the TinyG. Let me know if any modification needs to be done if you try it before I get mine. Thanks for looking =)Printed at .2 layer height @ 75% infill for rigidity. Was designed to use a standard 120mm computer fan. Uses 8 standard computer fan screws with an overall length of 10mm and a head diameter of 6.25mm. The fan screws are recessed with a stop so that the head of the screw stops to allow you to screw into the fan from both sides without the screws hitting each other. The holes for the TinyG Controller are all the way through to help accommodate multiple screw lengths. Hole diameter is set to 3mm for the TinyG. Might need to re-size that. Added tabs on the bottom piece for securing to a workstation or enclosure. Let me know if you have any questions.