Small drawers for all your little storage needs. Drawer case- 97 tall, 75 wide and 100mm front to back. Drawer big bin size- 33.5 X 46 and 20mm deep. Drawer small bin size- 33.5 X 22.25 and 20mm deep 8-2-15 Added 2 bin and 1 bin versions. 2-29-16 I'm releasing the Sketchup file so anyone can mod, enjoy.If the drawer locks too well in the closed position sand the bottom front face of the drawer below the handle. If printing without a heated bed or without good bed adhesion use the anti warp versions of drawers. A no top version of the drawer frame is included for stacking and reduced plastic usage of the lower segments. Model tolerances tuned with the expectation of 0.2mm layer heights, if thicker the drawers may not slide well. A average print cooling system is need to help with the minor bridging and stringing reduction. Some tuning of the slicer settings may be need to get the thin walls to print without vertical gaps in the filament paths. I had the most luck with only 1 perimeter and 10% infill. Take your time to inspect the tool path before printing. Slic3r slicer used on a Replicator2 with PLA plastic.