Armattan makes great frames for multicopters, Morphite frame is one of the latest creations designed for 1306 motors, 4045 props and 2S/3S battery. This thing will allow you to mount CC1563 camera on the frame securely using 2 x M3 nylon bolts and nuts. The mount protects the lens from all the sides, has holes for the camera wires and the microphone. Use 2-2.5mm wide ziptie to secure the camera (see the photo). Total weight with the hardware is about 1.5g (20% infill ABS, 2 perimeters). Useful links: Morphite 180mm Frame Morphite RXR Frame Kit CC1563 Camera RCG thread Feel free to PM me on RCG. Let me know if you like it and want to make a small donation, I'll give you my PayPal =) This mount may work with similar cameras that have the same size, though, I didn't test it.UPDATE: there is now a new lightweight version (CC1563-sparky.STL) that can be used on micro frames. Just use double sided 3M VHB tape. This version doesn't have the screw mounts and is a bit lower.ABS, 2 perimeters, 20% infill. PLA may melt because the camera can get hot (has linear 5->3.3V regulator).