ViKi LCD mounting bezel done in Sketchup, with a second back piece to make it a freestanding case. Use the bezel Sketchup file as a starting point for you own custom mount, or print both STL files and use together for a case. Print both halves. When the mating surfaces are printed on glass, they go together nicely with 2 smooth surfaces. Prints easy, no overhang. Print settings: Layer height = 0.25mm Fill = .2 honeycomb Shell Top, Bottom, Vertical = 2 Mounting use: 4x M3x12mm (minimum, could use longer) 4x M3 nut 4x M3 washer The hardware holds the display and both case halves together.