The ring is size 5 us, 16mm diameter band. The designs are from a Dragon Age: Inquisition promo image included in the gallery. I made all these on AutoCAD 2016 and printed them at actual size for the rings and 10x size for display. To make, just print the ring and ring topper at the same scale (1 is 16mm band) with supports on. Unless you make it smaller the supports under the top should be fairly easy to remove. The top snaps into the ring and fits pretty snugly. The non-ring files print without supports and work better for display. They have best resolution at 3x scale or higher. EDIT: I uploaded a second ring file, this one has a narrower band so it's easier to wear. I also found that with adequate support the ring could be printed as aligned in Ring4.stl so that there's no supports inside the band.