My remix of Croccy22's Virtual Reality headset. My friends told me to call it "viggeEyezzZ" just for fun, so I made a optional nametag wich I made using kitlaan's plant tag customiser. The rest of the parts can be downloaded from the original author: http://www.thingiverse.com/thing:93460 the answer is probably yes, if you have a 4" screen or larger it will fit your phone, i found that a 4.7" screen such as the iphone 6 will fit perfectly. But if your not sure You can print out the "Sections Through" by MattCook to see if it will fit: http://www.thingiverse.com/thing:485129 If it doesnt fit you can print out the big head version: http://www.thingiverse.com/thing:134496 There are tons of software on the appstore and i bet there is even more on androids appstore, just search for "virtual reality" or "google cardboard" and tons should pop up. I found mine to constantly be breaking near the chin. I found out if the screen was 1cm more away from the face, vision would be even clearer, but for my dad vision was clearer 3 cm away, so I came up with this 1cm spacer wich will fit onto itself and the original design (stackable). https://www.youtube.com/watch?v=zyDQ6UtXElw No supports needed! I printed mine at 0.4 mm layerheight at 40% infill at 70mm/sec Heat may vary printer to printer and fillament to fillament but I had a bed temprature of 70c and extruder at 200c Print took about 3 hours and cost 130 gram fillament