Bracket to mount an EZStruder (and stepper) to an OpenBeam extrusion at a 45 degree angle. The spacer is optional, depending on whether or not you need additional clearance for wheeled carriages. Print the bracket at with high infill due to the weight of the stepper motor. Note: The supplied STL is rendered for a large nema17 stepper (47mm), if your stepper is smaller, you will need to render your own version using the supplied OpenSCAD files (see instructions)BOM: If you want to render a new version using a different sized stepper motor, change nema_height in configuration.scad. Supported sizes are NemaShort (33mm), NemaMedium (39mm), NemaLong (47mm)