This is an experimental design to mount a LogitechHD270 Webcam on a Ordbot Hadron Y-pillar with the possibility to adjust the focus and image section. The mounting plate is simple so other webcams should fit too. Just fix the camera with a cable tie through the holes. The original Y-pillar of the Hadron must be exchanged by Y-Pillar_GimbalMount.stl. FreeCAD files included. This work is still in progress. During short movements on the y-axis of the hadron the whole arrangement tends to vibrations resulting in camera shaking. I used honeycomb infill with 50 % and 4 vertical perimeters to get it really stiff Use three M4 pan head screws of 35 mm length and wing nuts for easy fixation and shifting.