This is a quick and dirty PX3Flow mount for my 3dr X8 UAV. I didnt really have a good place to mount this on the frame, so I whipped up this little mount that attaches to the front left left. A quick overview video is here: https://youtu.be/UnaksthPU7c I have also attached the openscad file if you need to do additional adjustments. New version is in work that provides a bit more protection.I printed this with the following settings: 1) PLA 2) 60% fill, but can probably go lower 3) .35 nozzle 4) High speed, takes about 20 minutes to print. In the open scad file, the "hold_knob" value can be changed to make the fit tighter, or looser.