PLEASE SHARE A PHOTO OF YOUR PRINT IF YOU MAKE ONE ALSO if you want this modifying let me know and i will do it for you my old cnc machine ias sitting here gathering dust as i have not really got the space to operate a 1500mm x 600mm cnc router. ALSO i have finally got rid of the warping on my CTC machine - i tried all temps and glass plates e.t.c. and then i just covered the sides and front with see through cling wrap to stop the draft and i have had no probs with warping - in fact my only prob now is getting the print of the bed The PSU and Control box are seperate and i got fed up of the cables and loose boxes so i made a braket to fit over the psu and let it sit on the top of the control box. i had wanted to use the screws on the control box to hold it in place but the lengths were different. In the end the screws stopped the PSU sliding off. If anyone wants a cnc machine this big let me know (uk only) Not sure if you could make it into a really big 3d printer ! make 2 of these to support psu quickly at .4mm height