UPDATE: Redesigned with tapered and reinforced teeth for printing with a 0.25mm nozzle. download V2.1 Use at your own risk This is a design I used to fix the mirror on my 2006 jazz. It is the only plastic gear in the assembly and you can see in the photos its cracked and the shaft hole wore off. Its probably the same for models up to 2008. Designed so the teeth would print with .35mm nozzle. The gear will need some finishing, some filing between the teeth and shaft. The teeth are a touch longer so check the assembly turns easily and if not file a little all around. I found it useful to run the motor with a battery before connecting to the car as it will cut the power to the motor as soon as it feels some resistance, so make sure everything turns ok. The drive assembly is weather sealed with heat glue so you might find it easier to heat the part with heat gun first, in my case I just cut off the brim on the join to force it apart. Hope you find this useful, I definitely saved some cash.