Clip for mounting the Global Specialties EXP-350 solderless breadboard to DIN rail.Download and print two of the clips ( exp350-din_clip.stl ) for each breadboard. Use M3 screws to fasten the EXP-350 to the clips and then hang the clips on the rail and snap them in. ( the flexible tabs should be on the bottom ). If you have a M3 tap, chase the holes first to make threading the screws easier. The .dxf file has been modified from the original file that this was remixed from to make it easier to snap the clips onto the DIN rail. Nothing notable regarding slicing or heat settings for print.