11-23-2015 - READ BELOW BEFORE USING THIS THINGI have a completely new design. Looks similar but is done in openscad and is very customizable. As such, I am no longer updating this design. It's as good as it's going to get. Replacement design. http://www.thingiverse.com/thing:1141659**** Old description for this thing below.This is my X Carriage mount for the awesome E3D Chimera / Cyclops hotend. It includes a mount for a print cooling fan as well as a Z Probe Servo mount and Z Probe arm. I started out with another mount but found it didn't quite fit what I was looking for. So I gutted it and built a new one using the chimera hole pattern from http://www.thingiverse.com/thing:603881. This mount adds a print cooling fan, nut traps across the board, moves the Z Probe Servo mount to a better position that doesn't interfere with X movement and centralizes the mass a bit more. This also puts the Z probe endstop switch very close to the Y and Z axis of the extruder tip. Effective fan shroud designs is an art... I commend those of you who do it well the first time round. I currently have about 40 hours into the fan design.. UPDATE: Fan Mount 6 for 50mm fan has been added. It increases the size of the opening, less blowback and relocates the nozzle to avoid melting on the hot end. Please test it and let me know how it works. UPDATE 2: I am working on a modification to use blower fans. First will be the 75mm x 30mm and then a 50mm x 15mm. Coming soon! X carriage mount uses m4 screws and nuts. Servo mount uses m3 screws and nuts. Z Probe uses m2 screws and nuts. All STL files are netfabb fixed and print cleanly without a fan.Printed with PLA. 45% infill .2mm layer height .8mm shell thickness 1mm top/bottom thickness 4 - M4 25MM screws on the X carriage, I think... going from memory here. :) 2 - M3 15MM screws on Servo mount 2 - M2 10 screws on Z Probe endstop. 1 - M3 15 screw on Fan Mount - when it's completed... All STL files are netfabb fixed and print cleanly without a fan. The fan mount is still a work in progress. I've uploaded a skeleton for it, please feel free to finish it off! I will be in the future, will say this setup prints great without it, but bridging is a pain without it.