Maze Puzzle Box ====== Designed by benno de grote and 3D Modelled by TJWeb Read instructions in the instructions tab for information. THIS HAST NOT BEEN TESTED! If you try this before I get to. Please reply with photos / video or other info. Would love to see it! You'll need: CNC (Skip if 3D Print) If you are going to CNC machine this please do it on all the layers which are starting with CNC. (Just remember to select either hard / easy, no need to machine out both). Also to make the container deeper machine out more of layer 2 which is just the container walls. If you machine out 10pcs of layer 2 then you have a big container :) 3D Print (Skip if CNC) Unless stated its all printed at your selected layer height, your choice of number of walls, minimum 10% infill (recommended 25%). Print all the parts starting with "print_". On layer 1 you can select height or make your own. On layer 2 you can select either the hard or easy layer. Build the container: (parts that start with print_c or cnc_c) CNC: Glue layer 1 onto layer 2 then continue to glue all the machined layer 2 parts on top. When you are finished you can glue layer 3 on top of the last layer 2. When finished glue layer 4 on top of layer 3 so that when the groove is closest to you the lock pin on layer 4 should be on the left on the wall furthest away from you. (http://link.jepb.no/bacX) 3D Print: Glue layer 2 and 1 together like this: (http://link.jepb.no/bacX) Thats about it. Build the lid: Watch this movie and try figuring it out yourself :) Images: http://link.jepb.no/bBQl http://link.jepb.no/bBQl http://link.jepb.no/bCfH http://link.jepb.no/bC1R http://link.jepb.no/bCRG http://link.jepb.no/bAln Making the mechanism work: Now you should be able to turn the lid and slide the middle part on top and it should fall back in position!