A 4-segment box for cutlery. Base raised and contains holes for draining. Intended for 6mm material.The part with 6 holes is the side wall, cut 2 copies. The part with 16 holes is the base, cut 1 copy. The part which looks like a space invader is the end wall, cut 2 copies. The other piece is the internal divider, cut 3 copies. If your laser cutter and materials are like mine, I recommend painting it before gluing it. Edit: I found the bottom can fall off from the weight of all the cutlery. Either use a stronger glue than I did, or nails for the base, or keep some of the squares that were cut out of the base and use them as hidden legs to support the bottom from underneath.