barneyj made a wonderful case with a pivot mount for the camera on the case, I edited the files so that the raspberry case would be wall or ceinling mountalbe (screw holes), and so that the ball-mount for the camera could also be mounted on a surface, away from the case. The screw holes are 3.2mm (close to 1 8th inch) minus shrinkage. I also added a separate file with only the peices for the camera's wall-ball-mount. edit bug for some reason my parts are all printing on spec except for one which is 1mm off in width only (even though my SKB file is fine). I double checked my files and re-uploaded them, but I also added a new wall-mount section for the camera (the file is "wall_part_only") with larger openings just in case others are having the same problem. If you want to use that one directly, just erase the original one in the file containing all the parts.